基于Linux的聲壓級測量技術研究
本文關鍵詞: 聲壓級 實時信號處理 嵌入式Linux 時間計權聲級 倍頻程分析 出處:《浙江大學》2014年碩士論文 論文類型:學位論文
【摘要】:聲學是研究物質中機械波的產生、傳播和接收及其與物質相互作用的科學。聲音是由物體(固體、液體和氣體)的振動產生的,當一個物體振動時,就會激勵周圍的彈性介質隨之運動,以疏密交替形式并以一定的速度向外傳播而形成疏密波,這種介質的疏密波即為聲波,聲波會對接觸物體產生壓力,人能聽到聲音就是由于聲壓對耳膜產生振動而刺激神經,聲級計就是將聲壓信號轉換成電信號然后計算出聲級的測量儀表。作為最基本最常用的聲學測量儀器,聲級計既是工業生產中作為檢測機器工作狀態的手段之一,也是環境監測中測量噪聲的主要儀器,研究便攜的實時聲壓級測量儀器具有實際的工程應用價值。 本課題重點著眼于實時聲級計系統搭建和聲級實時測量的研究,從測量聲級的基本功能出發,在嵌入式Linux操作系統中設計出可移動的便攜式聲級測量儀器,采用聲壓傳感器、DSP多通道信號分析系統、搭載嵌入式Linux系統的ARM芯片組成實時聲級測量系統,將采集的模擬信號轉換為數字信號,通過設計的基于DSP的時間計權聲級算法和倍頻程分析算法,計算出各計權聲級和信號頻譜,將計算結果上傳給ARM進行后續的處理,充分利用了DSP強大的數字信號處理能力,完成了聲壓級測量分析系統的設計與實現。實驗結果表明,所設計出的測量系統能夠?qū)崿F(xiàn)對聲壓級的實時測量,達到國家標準一級聲級計的性能要求。 本文在嵌入式技術基礎上,對聲壓級測量技術進行了深入的研究,提出了時間計權聲級算法和倍頻程分析方法,針對DSP的運算特點對算法進行了優化,使得時間計權聲級的運算速度大大加快,倍頻程分析算法實現了多頻段的同步分析,提高了聲級測量的實時性,對于精度也有一定保證,實現了對采集的聲壓信號的實時處理。 實驗結果表明,系統在測量精度和測量實時性方面均達到了設計要求,各方面指標符合國家對于一級聲級計的要求。
[Abstract]:Acoustics is the science of studying the generation, propagation, and reception of mechanical waves in matter and their interaction with matter. Sound is produced by the vibration of objects (solids, liquids, and gases) when an object vibrates. The surrounding elastic media will be excited to move along with it and form a dense wave in the form of alternating density and propagating outward at a certain speed. The dense wave of this medium is acoustic wave, which will produce pressure on the contact object. People can hear sound because the sound pressure on the eardrum vibration and stimulate the nerve sound level meter is to convert the sound pressure signal into electrical signal and then calculate the sound level measurement instrument. As the most basic and most commonly used acoustic measurement instrument. The sound level meter is not only one of the means of measuring the working state of the machine in industrial production, but also the main instrument for measuring noise in the environmental monitoring. The research of portable real-time sound pressure level measuring instrument has practical application value. This paper focuses on the system construction of real-time sound level meter and the research of real-time sound level measurement, starting from the basic function of sound level measurement. A portable sound level measuring instrument is designed in embedded Linux operating system, and the sound pressure sensor is used to analyze the multi-channel signal. The real-time sound level measurement system is composed of ARM chip with embedded Linux system, which converts the collected analog signal into digital signal. Through the design of time-weighted sound level algorithm based on DSP and frequency-doubling analysis algorithm, each weighted sound level and signal spectrum are calculated, and the calculation results are uploaded to ARM for subsequent processing. The design and implementation of sound pressure level measurement and analysis system is completed by making full use of the powerful digital signal processing ability of DSP. The experimental results show that the designed measurement system can realize the real-time measurement of sound pressure level. To meet the national standards of the first level of sound level meter performance requirements. In this paper, based on embedded technology, the sound pressure level measurement technology is deeply studied, and the time-weighted sound level algorithm and frequency-doubling analysis method are proposed, and the algorithm is optimized according to the operation characteristics of DSP. The calculation speed of the time weighted sound level is greatly accelerated, the frequency doubling analysis algorithm realizes the synchronous analysis of multi-frequency band, improves the real-time performance of the sound level measurement, and also has certain guarantee for the accuracy. The real-time processing of the collected sound pressure signal is realized. The experimental results show that the system meets the design requirements in terms of measurement accuracy and real-time measurement, and all the indicators meet the requirements of the country for the first class sound level meter.
【學位授予單位】:浙江大學
【學位級別】:碩士
【學位授予年份】:2014
【分類號】:TB52
【參考文獻】
相關期刊論文 前10條
1 周偉;李雪蓮;;數字低通濾波器頻率特性的仿真研究[J];安徽農學通報;2007年05期
2 趙其昌;;最大聲壓級的測量及幾個物理概念[J];電聲技術;2007年11期
3 沈秋霞;姚青;樊冬毅;王忠明;胡潔;;基于DSP的1/3oct濾波器在聲級計中的設計與實現[J];電聲技術;2008年07期
4 黃晶晶;雷勇;;基于VC++的1/3倍頻程設計與實現[J];電子測量技術;2006年06期
5 金暉,何潔,鐘晴紅,張泳,張高燕;頻率計權的數字化實現[J];電子工程師;2005年01期
6 吳家兵;彭邦來;;等效聲級計算模板的設計與應用[J];公共衛生與預防醫學;2008年03期
7 晏廷飛;方貴前;;聲學試驗三分之一倍頻程控制技術研究[J];航天器環境工程;2008年05期
8 楊昌棋,秦樹人,何輝;基于FFT的虛擬實時噪聲倍頻程分析儀[J];測控技術;2000年09期
9 陳凡;;一種數字式噪聲測量系統的設計[J];機床與液壓;2011年02期
10 范龍江;那虹剛;李冰;;虛擬儀器技術在聲級計檢定中的應用[J];中國計量;2010年03期
相關會議論文 前1條
1 紀艷艷;孫軍濤;;1/6倍頻程濾波器的設計與分析[A];2013中國西部聲學學術交流會論文集(上)[C];2013年
,本文編號:1465264
本文鏈接:http://www.lk138.cn/guanlilunwen/gongchengguanli/1465264.html