發布時間：2019-01-16 02:04

【摘要】：將數字圖像相關方法用于測量含Ⅰ型裂紋Cr12MoV鋼的斷裂韌性。搭建了數字圖像相關方法非接觸光學測試系統,通過進行三點彎曲試驗,得到了Cr12MoV鋼試件裂紋尖端的位移場。從位移場提取了裂紋嘴張開位移,并通過P-V曲線得到Ⅰ型裂紋Cr12MoV鋼的斷裂韌性。將實驗結果與傳統COD引伸計測試結果進行對比,誤差不超過10%,證明該方法是準確的。
[Abstract]:The digital image correlation method is used to measure the fracture toughness of Cr12MoV steel with mode I cracks. A digital image correlation method non-contact optical measurement system is built. The displacement field at the crack tip of Cr12MoV steel specimen is obtained by three point bending test. The crack opening displacement was extracted from the displacement field and the fracture toughness of mode I cracked Cr12MoV steel was obtained by P-V curve. The experimental results are compared with those of the traditional COD extensometer, and the error is not more than 10. It is proved that the method is accurate.
【作者單位】： 昆明理工大學建筑工程學院;昆明理工大學云南省高校先進材料力學行為與微結構設計重點實驗室;
【基金】：國家自然科學基金項目(11362007,11462009)
【分類號】：TG142.12

【相似文獻】

相關期刊論文 前2條

1 郭海鴻;李曉星;;非接觸應變測量的數字散斑相關方法的研究[J];現代制造工程;2007年11期

2 申晉,鄭剛,李孟超,孫國強;PCS顆粒測量技術中軟件相關方法的研究[J];儀器儀表學報;2003年06期

，

本文編號：2409347